Tools4Boards Switch Cut:
Take down just enough sidewall to expose more metal edge for filing, then simply rotate tool 180º to sharpen and hone the side edge at either 2° or 3°. 0° angle bar surface provides convenient fence to sharpen plexi scrapers. To switch between 2° and 3° simply detach angle bar from wear plate, rotate 180º then re-attach, no need for multiple fixed angle guides. Trash the expensive carbide cutters that tear away too much sidewall compromising structural integrity or chatter down the length of your ski or snowboard edge causing impossible to remove "washboard". The 7° angle bar perfectly positions a file to readily trim sidewall missing the metal edge typically set at 2° or 3°. Place the coarse side of a Tools4Boards Combi-Cut or panzer file (sold separately) on the outwardly facing 7° angle bar surface and draw the tool down the sidewall using light pressure. Multiple file teeth in contact with the sidewall prevent the file blade from digging in. Minimizing sidewall removal maintains necessary support for the metal edge and greatly extends ski or snowboard life. To switch from sidewall trimmer to plexi scraper sharpener, simply detach angle bar from wear plate, rotate 180º then re-attach so the 0° surface is outwardly facing. Place a sheet of 180 grit sandpaper (sold separately) on a flat surface underneath wear plate and slide plexi scraper back and forth using 0° surface as a fence.
· We start with a .2" (4.5mm) thick surgical grade stainless steel wear plate for unprecedented durability.
· Add modular 2°+3° and 0°+7° angle bars precision milled from aircraft grade aluminum, sand blasted and anodized to 15 microns for military spec. accuracy.
· Durable laser etched angle number markings.
· Wear plate cut-outs provide open areas for both sidewall debris and edge filings to fall away from base.
· Disc position indicators (+ symbols) on angle bars provide quick and easy alignment of new Tools4Boards Puck diamond discs maximizing disc cutting and polishing efficiency.
· Wear plate screw ports allow 4°+ 5° angular bar (available but sold separately) to be mounted.
Compatible with all interchangeable Switch system components. Domestic and foreign patents filed and pending.
Tools4Boards, official partner and competition supplier of the U.S. Ski Team, U.S. Snowboarding, U.S. Freesking, Alpine Canada, Canada Ski Cross and Canada Para-alpine.
Use the Wintersteiger Gauge Drill Bit with a standard drill and without a binding mounting jig. Whenever the thread on your binding mounting screw has been stripped, you can drill a brass or plastic insert into the ski or snowboard. You can pre set the drilling depth according to your needs with the
locking collar
. This way you will avoid drilling directly through the base of the ski or snowboard. This
drill bit
is essential in any ski repair or rental shop.
For drilling brass or plastic inserts into skis and snowboards
Adjustable depth
8mm (0.32in)
For use with standard drills
Part Number: 55-100-351
