Store Policies
About Racewax
Wax Selection
How to Tune
Equipment Checklist
SKI & SNOWBOARD WAX
TUNING TOOLS
ACCESSORIES
TUNING TIPS
RaceWax Pro Ski Wax Brush Kit: Nylon HorseHair Brass in Deluxe Case
By:
RaceWax
A full set of professional ski wax brushes designed for durability with quality bristles on a hardwood handle, ergonomically grooved for grip.
Brass brush (10 mm) for renewing base structure, opening pores before you wax (for this step brush in the opposite direction - tail to tip), and brushing hard (green/blue) waxes.
The nylon brush (10 mm) is the workhorse for wax removal. Designed to be stiff enough to remove wax in less passes to save you time.
A fine-bristled horsehair brush (7 mm) for removing wax from the fine structure of your base for the ultimate polish!
Deluxe zippered storage case with the RaceWax logo included.
Each brush measures 3 in x 4.5 in.
Order of stiffness for rectangular brushes sold here (stiffest at top; softest at the bottom):
steel
brass
brass/horsehair
white nylon
blue nylon
7-mm horsehair
18-mm horsehair
Common uses for brushes in this kit:
In general the progression of brushes after scraping wax from your base is to start with the stiffest and end with the softer/finer brush. In this set, brass is the stiffest and horsehair the finest, however, there is no need to start with a brass brush on softer waxes because the nylon is perfectly efficient at removing this wax.
Start with brass if brushing cold-rated very hard waxes.
You can also use brass to renew your base structure and open pores for improved wax absorption. Do this by brushing tail to tip. Pores get beat down in the tip to tail direction and close. Brushing with brass in the opposite direction (tail to tip) can open the pores.
Brass is also commonly used to brush dirt and old wax off a ski surface before waxing.
Nylon is the workhorse brush; use it to remove most of the wax with repeated brushing.
Horsehair has finer bristles and can reach down into the fine structure of the ski base. Use it after the nylon for final polishing. Also good for buffing racing overlays.
Welcome to RaceWax, since 1999, a family-owned and operated ski/snowboard wax and tools company that is committed to offering quality tools and racing waxes at great prices.
Please read our eBay Guides on tuning by clicking How to Tune and other links to the right of our logo.
Contact us through eBay anytime (24 hours/day, 7 days/week) for customer service.
Our system will send us a notice and we will answer promptly.
Guaranteed full refund on defective merchandise. Non-defective items must be returned in original condition; restocking fees may be applied to used/opened items or damaged packaging. Returns must be shipped within 30 days of receipt.
For items shipped free within the USA, our shipping cost to send the item to you is not refunded, and will be deducted from refunds for returned items. Customer pays all return shipping costs. It is highly recommended that the item be packaged well to avoid damage and that the shipment be tracked.
USA: Free USPS Mail means combined shipping is easy - it's all free!
CANADA & WORLDWIDE: Click the Shipping and Payments tab and select your country for the shipping charge. To combine foreign shipping costs, commit to buy all items, but do not pay; request a combined invoice. All items ship by weight,
so while it may be possible to combine and ship small items for free, larger items will ship at a reduced cost, but not free.
We strive to ship orders within 24 - 48 hours. If you have any special/urgent requests please contact us in advance and we will do our best to honor them.
This item ships free to all of the 50 USA states! Our primary domestic shipping method is USPS First Class for items under one pound and USPS Priority for heavier items. Ski tuning tables and similar large items as well as pressurized flammable liquid products will ship UPS Ground as legally required.
CANADA & WORLDWIDE: Click the Shipping and Payments tab and select your country for the shipping charge. Any duty or fees that may be imposed by your country's customs office is your responsibility to know and pay; additional taxes/duties/fees imposed by your country are not included in the price.
Shipping costs may be reduced when combining multiple items; price reduction is based on product weight, ask first with a specific list of items. Shipping costs cannot be reduced after the items have been shipped.
NOTE! First Class shipping can take 1-2 WEEKS, and up to 4 WEEKS; if you need it sooner ask for a quote on PRIORITY (1-2 WEEKS) or EXPRESS (1 WEEK) before you buy.
FOREIGN CUSTOMERS PLEASE READ: Customs documents will display the actual purchase amount as required by law. Requests to mark shipments as gifts will not be honored without warning. Liquid products cannot be shipped to foreign countries. Also, due to problems with the Italian and Russian post we no longer ship there, and reserve the option to cancel/refund orders to these countries and any others that present delivery issue without notice at our discretion.
Copyright 2020 RaceWax
Tools4Boards Switch Cut:
Take down just enough sidewall to expose more metal edge for filing, then simply rotate tool 180º to sharpen and hone the side edge at either 2° or 3°. 0° angle bar surface provides convenient fence to sharpen plexi scrapers. To switch between 2° and 3° simply detach angle bar from wear plate, rotate 180º then re-attach, no need for multiple fixed angle guides. Trash the expensive carbide cutters that tear away too much sidewall compromising structural integrity or chatter down the length of your ski or snowboard edge causing impossible to remove "washboard". The 7° angle bar perfectly positions a file to readily trim sidewall missing the metal edge typically set at 2° or 3°. Place the coarse side of a Tools4Boards Combi-Cut or panzer file (sold separately) on the outwardly facing 7° angle bar surface and draw the tool down the sidewall using light pressure. Multiple file teeth in contact with the sidewall prevent the file blade from digging in. Minimizing sidewall removal maintains necessary support for the metal edge and greatly extends ski or snowboard life. To switch from sidewall trimmer to plexi scraper sharpener, simply detach angle bar from wear plate, rotate 180º then re-attach so the 0° surface is outwardly facing. Place a sheet of 180 grit sandpaper (sold separately) on a flat surface underneath wear plate and slide plexi scraper back and forth using 0° surface as a fence.
· We start with a .2" (4.5mm) thick surgical grade stainless steel wear plate for unprecedented durability.
· Add modular 2°+3° and 0°+7° angle bars precision milled from aircraft grade aluminum, sand blasted and anodized to 15 microns for military spec. accuracy.
· Durable laser etched angle number markings.
· Wear plate cut-outs provide open areas for both sidewall debris and edge filings to fall away from base.
· Disc position indicators (+ symbols) on angle bars provide quick and easy alignment of new Tools4Boards Puck diamond discs maximizing disc cutting and polishing efficiency.
· Wear plate screw ports allow 4°+ 5° angular bar (available but sold separately) to be mounted.
Compatible with all interchangeable Switch system components. Domestic and foreign patents filed and pending.
Tools4Boards, official partner and competition supplier of the U.S. Ski Team, U.S. Snowboarding, U.S. Freesking, Alpine Canada, Canada Ski Cross and Canada Para-alpine.
